Ask Experts Questions for FREE Help !
Ask
    newrenter's Avatar
    newrenter Posts: 1, Reputation: 1
    New Member
     
    #1

    Sep 7, 2011, 10:20 AM
    Heil Furnace NUGC100AF01 Owners manual?
    I just moved into a rental with a Heil Furnace NUGC100AF01 (maybe 1978-1980?) I've never had a unit like this before. I was surprised by the large pilot light about 2 inches wide and 4 inches high that the guy from the gas company lit. I was also surprised by the hissing noise that the unit makes when idle. (After all it's still summer I don't need heat) and it seams like it is using a lot of gas just for what I imagined would be a small pilot light but is more like if I had a burner turned on on my gas stove from the sound it makes. Does this sound normal? Where can I get info on the furnace/ owners manual? And anyone know Where I find the filter to change it?
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
     
    #2

    Sep 7, 2011, 12:01 PM
    Yes, it's normal for the age of the appliance, although 2" X 4" seems a bit big in my opinion. That's why there are no more pilot lights. If this is a rental, the landlord should change the filter. However, it could be anywhere, next to the heater, in the cold air return side or even in the grills, or in a large 20X24" or so wall grill. Some people turn off the pilot for the summer but who will relight?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Need owners manual for Clare Brothers furnace, model # OHR-3FD,Ser. # 9410C003112, [ 1 Answers ]

I bought... second hand,a Clare Brothers furnace, model # OHR-3FD, Ser. # 9410C003112, Burner Beckett AFII85, 60 degree nozzle. Need owners manual, also an Instillation manual, and does anyone happen to know when this type of furnace was made. Thanking you in advance for any help... M

Heil furnace manual [ 4 Answers ]

HEIL model (GNJ 075M16A1) stat calls for heat, draft motor comes on, about 10 to 15sec ingintor glows, (Honeywell Q3400A) OHMS out cold 7.9 hot 12.3 decreases as cools down, gas valve does not produce pilot (still OEM product), all safties are OK, pressure switch seems to be fine (tested jumpered...

Owners manual temstar furnace [ 0 Answers ]

Does anyone have a owners manuel for a temstar PS90 furnace?

Owners Manual [ 1 Answers ]

Does anyone have a copy of the owners manual for a noma 8/25 snowblower


View more questions Search