Ask Experts Questions for FREE Help !
Ask
    drlawlis's Avatar
    drlawlis Posts: 1, Reputation: 1
    New Member
     
    #1

    Sep 2, 2011, 07:34 AM
    Furnace a/c furnace fan stops as soon as compressor stops?
    I have an Armstrong sx90 gas furnace w a/c. The furnace circulating fan quit operating. The tech replaced the circuit board (part no 40403001) which had a burnt diode. Now the fan operatesin all functions, but stops as soon as the compressor stops. It used to run on for a minute or two after compressor stopped. An solutions?
    T-Top's Avatar
    T-Top Posts: 1,871, Reputation: 100
    Ultra Member
     
    #2

    Sep 2, 2011, 08:38 PM
    The blower conrol board has a time delay off setting on it. You paid good money to have it put in, call them back to finish the job.(I say warranty call back.) My blower has never shut off it runs 24/7. I have my thermostat set for fan ON all the time. It keeps a more constant whole house temp. Blowers a made to run around the clock if you want them to and at very little cost.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My trane furnace blower fan stops intermittently [ 2 Answers ]

I have a 15 year old heat pump and electric furnace I am so proud of it lasting this long with no problems, but the blower motor will stop running about once a month usually when I most need it (meaning maybe it has stopped other times and I have not noticed it.) I can see the unit is still getting...

Goodman furnace problems when running the ac it starts stops starts stops [ 1 Answers ]

I have a goodman furnace 98% efficient it works fine on heat but when I run the ac unit it will run fine for an hour or three but then it will start stoping and starting the blower motor I have changed the transformer the blower motor the door switch anyone have any idea why it does this any help...

My RUUD compressor chatters loudly and stops when fan gets to speed. [ 1 Answers ]

My RUUD compressor makes a loud chattering noise then the fan comes on and the chattering noise stops. I have replaced the Start and Run Capicators

Furnace fan never stops [ 3 Answers ]

I have an old furnace-20-30 years old which the fan doesn't turn off. We have an old Honeywell thermostat with a the mercury tube inside. I was thinking I could just replace it with a newer programmable one. Will this solve the problem? Is there anything else I can try before replacing it? I...

Condensing unit fan stops compressor still runs? [ 1 Answers ]

I have a Bryant 561C, about 7 years old. The Fan on the outside condensing unit would stop but the compressor would stay running. Tested the fan motor and it was drawing high amps. Replaced the fan motor but the unit will run for about 30 to 45 minutes. And the fan will stop but the compressor...


View more questions Search