Check out some similar questions!
Whirlpool washer, agitator works, but during the spin cycle it doesn't spin
[ 1 Answers ]
I have a whirlpool washer, I replaced the outer tub and the drive block, but it now doesn't spin. It drains the water, I can hear the motor come on, and feel the vibration . The switch is fine. I looked at the couple, but did not take it apart. The clutch looked fine, sanded the pads and case....
Kenmore Elite Washer does not spin in slow spin cycle until lid is opened and closed
[ 0 Answers ]
I have a Kenmore Elite Top Loading Washer, Model 110.24952300. When the washer goes to the spin cycle, it does not spin in the first spin cycle. It does this in the slow spin cycle that precedes the main spin cycle. When it cycles to the regular spin cycle, it does spin properly. I found that...
Kenmore washer 70 series humming at spin cycle - won't spin
[ 4 Answers ]
RE: kenmore 70 series model 110.20712990 Type 111 top load washer. Won't spin. Humming noise and a little burning/hot smell when supposed to be spinning. Bypassing the lid switch did not correct the problem. Changed out the motor coupling with no luck... still a humming noise but no smell. View more questions Search
|