 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Way to locate ballister on bottom rail of e-z fit rails
I am trying to figure out how to locate the balusters on the bottom rail. The top side has mitered holes that they fit in. Instructions say to screw the baluster to the top side on the bottom rail. What is the trick to accurately mount (spacing, center pilot hole)?
|
||||
|
||||
|
Cut rail to length to fit between post. Note that in drawings the top of rail is red, bottom of rail is black. Top end of rail is marked. The dotted line is just a theoretical plumb line showing proper angle of pilot hole and baluster.
Turn rail over so that bottom edged in on top. Turn rail around so that top end of rail is at bottom. Lay rail on steps. Mark proper spacing. Do you know how to make spacing come out even? Drill pilot holes with hand drill that has a level bubble. Do you know how to find proper angle to cut ends of balusters? |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I was given an above ground pool that is in excellent shape except for 3 of the curved bottom rails/tracks/rims are rusted badly. The rest of them are in great shape. I have no idea of the brand of pool but the tracks are 1" wide x 3/4" tall x 56" long (measured on the outside of the curve. They...
Badley rusted
I have a 24' round pool bottom rail is badley rusted where can I buy a replacement rail?
I recently moved my pool and found that some of the bottom rails are rusted. I lost all of my pool info in a house fire last year. Where can I find these types of replacement parts?
I am trying to find the rails for under my silverado pool. It is between 10 and 13 years old. Does anyone know where to find it? I have searched extensively for it online and not been able to discover anything close. I would appreciate any ideas. Thanks!
View more questions Search
|
