Ask Experts Questions for FREE Help !
Ask
    Michael_C's Avatar
    Michael_C Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Aug 25, 2011, 12:27 PM
    How to install Link choke for Briggs engine?
    Need to verify how the link choke for my 18.5 hp Briggs engine operates.

Check out some similar questions!

Install Link Choke of Briggs & Stratton Engine [ 10 Answers ]

The link choke of my Murray tractor engine is loose. I could not figure out how to put it back. Can someone help? A diagram will be super. The engine model is 28v707 type 1113e1. Thanks.

Briggs&Stratton won't run w/o choke [ 9 Answers ]

There is no water in the fuel, replaced fuel pump diaphragm's and springs. Will start and run with the choke 7/8 closed, as I increase the throttle I can open the choke more until the throttle is wide and the choke is closed. Hellllp. It is on a 19.5 hp craftsman 42" mower ~ 8 years old. ...

Choke engine, engine starts, Choke off, engine dies [ 3 Answers ]

I have a two year old 5hp Honda enigne on a Troybilt frame. When the choke is engaged, the engine starts on the first pull. After the choke automatically shuts off, the engine dies immediately. Repeating same thing happens. Will not contiue to run.

Choke linkage for 16hp briggs same set up? [ 0 Answers ]

How to attach the choke linkage? Model #311777-0143-e1

Briggs and stratton runs on full choke only [ 1 Answers ]

I have a briggs-stratton generator model 030235 that will only run on full choke. I have changed the fuel and cleaned the carburator. Any other suggestions?

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.