Ask Experts Questions for FREE Help !
Ask
    GreenStratMan's Avatar
    GreenStratMan Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 14, 2007, 04:17 PM
    Wiring 3 150 watt bulb in parallel
    Hi

    Will twin 0.75mm flex be OK. There will be less than 3 feet of flex in total. The fittings are porcelain so no earth. Supply is uk, 240v.

    Thanks
    milky's Avatar
    milky Posts: 2, Reputation: 1
    New Member
    		  
    #2

    Feb 14, 2007, 05:18 PM
    Would be a little specfy. Since you only have 36" wire, you need at least 6" in each box. That leaves you my friend 18".therefore you will have 6" spacing on each box:)
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

150 Amp residential service [ 1 Answers ]

What size wire is needed for a 150 amp residential service?

98 F-150 coil packs [ 1 Answers ]

I just recently purchased a 98 F-150 5.4L. When I test drove it it had no power and the engine studdered violently. When they repaired the truck they told me it was bad coil packs causing missfires. 10 days ago I picked the truck up running smooth and strong. Then yesterday it just started doing it...

1999 f-150 [ 2 Answers ]

I am having a problem with the odomiter in my truck.Some times when I take off the park brake the odomiter goes out. It seames to keep track of the milage but goes out after a few miles it comes back on. Other times it will go out just driving then come back on.Drives me crazy need the odomiter to...

View more questions Search