 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Does anyone know of a bendable strip to transition from 3/4 inch to 1/4 inch vinyl?
We are planning to install 3/4 inch hardwood flooring and retain our vinyl kitchen floor. The vinyl ends in a curved area where it will butt into the new hardwood. We cannot find a bendable transition strip where the two floors meet.
|
||||
Check out some similar questions!
How do I fix this.
We are renovating our bath and were told that the solid surface double bowl Pegasus counter we purchased would fit our faucets which are 4 inch center. When we started to install the counter it was for 8 inch center faucets. We cannot return our faucets which were very exppensive because of lead...
I recently purchased a home built (I'm guessing) in the early 1900's. I noticed a leak in my basement coming from the old 4 inch cast iron soil stack running from my second floor bathroom to the basement. There is water dripping down the pipe to the basement. Three plumbers have come out to...
We have installed travertine tile in a large foyer. The transition to the living room is 3/4 inch difference to terrazo. What can we use for the transition? There is also a step down on the other side of the floor. Is unfinished travertine edge strong enough for the edge with foot traffic?
I just installed a new 72 inch long Marble vanity in my bathroom. It came with a 72 inch long by 4 inch tall Marble Backsplash. How do I install this backsplash? Do I just put an adhesive behind it? What about the gaps? How do I fill the gap of the top of the backsplash where it hits the...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
