 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Hampton Bay 3 speed ceiling fan
The fan switch was smashed inside the encasement, so when I took the switch out, none of the four wires were attached to the switch. There are four wires for the fan 3 speed switch.
The colors are orange, yellow, purple and black. There are L, 1, 2, and 3, written on the switch. I tried L-orange, 1-black, 2-yellow and 3-purple. The fan will shut-off and go on high speed only. I tried 1-yellow, 2-orange, 3-black and L-purple. The fan will go on high speed and medium speed only and not shut off. I have no idea what conclusion I can make from these combinations. So I'm totally confused. Any suggestions? Thank you. |
||||
Check out some similar questions!
My Hampton Bay ceiling fan (Delano model) was professionally installed and worked as advertised. Last time I turned it on, however, I found it only worked on high speed. The remote will turn it on/off and reverse it. I hear something from the fan (a click) when I push the "slow" button, but it...
There is no pull chain, only a remote. Remote says high, med, low, but they are all the same speed, HIGH. I have changed the batteries in the remote with new batteries. No change. Remote works with all other features, light dimmer, fan reverse, etc. I believe I need to replace the fans remote,...
The chain on the fan switch broke of and I bought a replacement at HomeD. I forgot to tag the wires and can't seem to properly connect the 4 wire to the new switch. Cable colors are: White, Black, Yellow and Blue and the switch has an "L", #1, #2 and #3 where the cables should be connected....
The pull chain controlling the fan speed snapped off inside the unit. How much disassembly is required to replace it?
One of our 3 speed fans suddenly only has one speed-slow. Any suggestions or comments to help us. It's HOT
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
