Ask Experts Questions for FREE Help !
Ask
    wtburden's Avatar
    wtburden Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 9, 2011, 08:22 AM
    Hunter fan model 27302 won't turn on after installation
    Im installing a hunter ceiling fan model 27302. I've followed the instructions for wiring the fan and checked it with a tester to make sure that it has power and it does. The fan or light won't turn on. For the fan to get power I have to disconnect the wire labelled common in, but even then it won't turn on. What do I do
    angiepuddinpie's Avatar
    angiepuddinpie Posts: 1, Reputation: 1
    New Member
    		  
    #2

    Jul 16, 2012, 10:32 AM
    Did you figure out the problem?? I out up a Hunter ceiling fan today and I am having the same problem. It will not turn on. I was soooo excited that I had installed a ceiling fan all by myself, turned the power back on, flipped the switch, and... nothing. I am very frustrated also.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hunter universal fan remote installation [ 3 Answers ]

Using fan with three wires... From fan: 1. black marked LIGHT KIT 2. black plain not marked 3. white marked NEUTRAL Hunter remote unit Five wires:

Fan switch on hunter ceiling fan model #20537 not working. [ 1 Answers ]

The fan switch on my hunter ceiling fan model #20537 is not working. What colored wires are supposed to go into the switch, and at what position on the switch? I have 3 wires, green, brown and gray. The switch has 4 slots, 3 L 2 1

Hunter Fan Model 23282 - Wire Hunter Control Model 27182 [ 3 Answers ]

I have a new house that came pre wired for a light/fan. I connected my Hunter Fan (Model 23282) to the ceiling wiring as such FAN/Ceiling Wiring White/White Black/Black Black-White/Red Green/Green I believe I wired the celing correctly.

Hunter Fan Installation Where there are 2 wall switches [ 5 Answers ]

I'm replacing an old ceiling fan with a Hunter fan and light. The fixture is positioned between wall switches on opposite walls and has two incoming black and white wires. The old fans I used in this room had a black wire, a white wire and a ground and all like colored wires were simply wired...

Hunter Ceiling Fan Light Installation [ 1 Answers ]

I bought a house with a Hunter ceiling fan with remote (no light). I went to the store and purchased a light to go with it. The instructions on the light say that I have to dismantle the entire remote system by unplugging it, but I don't see where I can do this. There are 2 black boxes with wires...

View more questions Search