 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
RCA HD52W59 power issues
I was given a 52in RCA HDTV and they said that it had a 3D image. When I plugged it in I couldn't get it to power on so I replaced the bad fl231 convergence fuse that was causing the 3D image but I still can't get it to power on. After replacing the fuse I got the power button to come on and all it did was flash until I unplugged it now it won't do anything again. I checked the fuse and it's still good so I'm now lost with this thing. Any help would be great
|
||||
|
|
Check out some similar questions!
I disconnected the power cord on a G4 MDD dual 1.25 to reset the firewire ports and now the unit will not power on. When I push the power button it flashes on for a sec and then nothing happens. I tried doing a SMU reset and a different power cord to no avail. I have had this unit for about 6-7...
I have a 61in. RCA Big Screen HDTV. It will not come on when you press the power button it just flashes three times.
I recently got a RF p4004 4chan. Amp for my car and I'm looking to hook up a sub or two. My question is how can I hook this up. I have run all my amp wires (Bat. remote, ground) but the only input I have for my amp is a pair of RCA cables. I took an old cable and cut the terminals off one end...
I have an RCA model# 32V550T television and am having a problem with the power shutting off. I am using a surge protector and the sleep timer and "kidpass" are not set so those can't be causing the problem. Turning it on "cold", it will play for about an hour. I can turn it on immediately but every...
View more questions Search
| Question Tools | Search this Question |
|
