Ask Experts Questions for FREE Help !
Ask
    surgicalseven's Avatar
    surgicalseven Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 5, 2011, 11:16 PM
    AO smith Hot Water Heater erratic/wont stay lit
    I have an 8 year old AO smith Power House Power Shot model MF03-2528832-270 hot water heater (pilotless)

    Everything seems to work as normal, glow plug lights up, gas valve turns on, flame ignites, and then the burner comes on.
    The burner stays lit for about 5 seconds, then goes out.
    It repeats this process 3 times, then quits trying and goes into vacation mode.
    If I continue to turn it off and on, eventually the flame will stay on, and I'll have hot water for another day.

    I have a multimeter, o-scpoe, misc other tools, and a strong electronics background if that helps. Can someone point me in the right direction?
    Thanks
    scottmead's Avatar
    scottmead Posts: 3, Reputation: 1
    New Member
    		  
    #2

    Jul 25, 2011, 06:28 AM
    I had the same problem. A guy came out and cleaned the area underneath... a screen area. He said it was very easy and would show me how to do it in the future, but I wasn't able to be there. It's happening again now so I'm trying to find out what the part is called that he cleaned. But, if you can figure it out from here you'll be fine for about a year. Our area is a little dusty and seems to affect it. Keep the area clean and you may be okay.
    scottmead's Avatar
    scottmead Posts: 3, Reputation: 1
    New Member
    		  
    #3

    Jul 25, 2011, 06:33 AM
    Follow up. I just found the name of the part that was cleaned. It could be a dirty or grounded flame sensor.
    scottmead's Avatar
    scottmead Posts: 3, Reputation: 1
    New Member
    		  
    #4

    Jul 25, 2011, 06:41 AM
    Comment on scottmead's post
    And here's a link to some good tips. http://www.doityourself.com/forum/water-heaters/221664-5-year-old-o-smith-50-gal-gas-water-heater-wont-heat-regularly.html
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My hot water heater won't stay lit. [ 3 Answers ]

When I try to relite the pilot it lites but as soon as I let go of the button it goes back out. I've tried replacing the thermol couple but I still had the same results.I just got the water heater from a friend its only a year old and it's a whirlpool.. I've had it hooked up for 5 days before it...

Hot water heater won't stay lit. [ 0 Answers ]

I have a power vented gas model hot water heater that is about 5 years old. About every three or four days the main burner won't stay lit. The flame is even all around the burner with normal color. I will swithch it off then on and can see the ignitor heat up and the burner will light right away,...

Water heater pilot won't stay lit? [ 4 Answers ]

50 gallon NG Water heater still in warranty, but for parts only. Burner and pilot would light but go out later. Whirlpool sent me the complete pilot/thermocouple assembly - no help (I used to be able to get the burner to light, but not now). Then they sent me a new gas valve. All installed. ...

Water heater pilot won't stay lit [ 1 Answers ]

The pilot light on my water heater went out yesterday and I was able to get it going and had hot water for most of the day. But it went out again last night, and I was able to get the pilot light to relight when pressing the button but when let up on immediately goes out. I tried replacing the...

Hot water heater won't stay lit [ 3 Answers ]

My gas hot water heater is two years old and the pilot light won't stay lit. A plumber said the screen is probably clogged. Is this something a licensed plumber has to fix or can I do it myself without causing damage to the hot water heater?

View more questions Search