Ask Experts Questions for FREE Help !
Ask
    singhn's Avatar
    singhn Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 20, 2011, 09:48 PM
    How to get rid of telephone trouble from 1832 dsc panel
    I am planing to not have my security system moniter so I did not hooked up telephone line to system.system show trouble # 3.how I can get rid of it.
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #2

    Jul 21, 2011, 04:54 AM

    Not sure if the location is 015 or 380, 1 of them is Communication Disable, the other is telephone Line Monitor, change the values of both with Installers code.
    stylinHayN's Avatar
    stylinHayN Posts: 1, Reputation: 1
    New Member
    		  
    #3

    Nov 13, 2011, 07:37 PM
    Section 015 turn off 7, then section 380 turn off 1
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

DSC PC 1832 programming troubles [ 9 Answers ]

Hi…I am currently replacing an old DSC PC 2525 home security system with a newer PC 1832. The trouble is… I am having difficulty even getting to first base programming this unit Is there someone on board who can walk me through this? This is what I have: 2 new keypads.. a pk 5501 at the...

What do I need to connect a DSC 1832 control panel to a Control 4 home automation sys [ 2 Answers ]

What do I need to connect a DSC 1832 control panel to a Control 4 home automation system?

Is there a way to reset master code on dsc 1832 [ 2 Answers ]

I have a DSC 1832 security system at my home but never got the master code from the installer who I have now lost touch with. I need to set the clock on my 5501 keypad and it appears that requires the master code. I have the installer code which is still the default code and I have my user code...

Trouble with DSC 1832 programming [ 3 Answers ]

Recently I have installed dsc 1832 security system . So far I have done good. But I can not solve my smoke detector problem . Smoke detector is FSA-410BT 4-wire . I have run cat5 wire for this connection . The reason is simply - I had left over cat5 . I have used Bro for 12v+ and BLU for GND....

Dsc 1832 resistor value [ 1 Answers ]

I have a DCS 1832 and I am getting intermitting open. The wires at the control panel are tightly secured. It could be a resistor problem and I am unsure of to what the resitor value should be for the zones. Can you help?

View more questions Search