Ask Experts Questions for FREE Help !
Ask
    poncho0723's Avatar
    poncho0723 Posts: 4, Reputation: 1
    New Member
    		  
    #1

    Jan 19, 2010, 01:52 PM
    Code P0335
    Code P0335 what do this code means?
    Hi I have a 1999 Hyundai Elantra GLS the car shut off on the middle of the road and just give me this code PO335 Crankshaft position sensor A circuit malfunction? What do this means it has to do with the timing belt maybe? Please help
    ALyrics's Avatar
    ALyrics Posts: 1, Reputation: 1
    New Member
    		  
    #2

    Jul 18, 2011, 10:54 AM
    I have a Hyundai Elantra 2000 and my car will shut down when I'm sitting long at a stop light. It'll take me 5 minutes to turn the car back on and then I'll start driving down the road. At some point the car will feel like it shut down but the pannel lights are still off. I would give it gas but on a straight away it still wouldn't excellerate. Yes the check engine light is one but its been on for a couple of months now and the car was running good until now. Also I don't have a gas cap so I'm thinking that might be the problem. I have 3 codes on my car... and that is P0455 P0442 and P0335.
    CaptainRich's Avatar
    CaptainRich Posts: 4,492, Reputation: 537
    Cars & Trucks Expert
    		  
    #3

    Jul 20, 2011, 04:51 AM

    The P0335 relates to the Crankshaft Position Sensor (CKP) and that is likely your car's problem with shutting off. The other two codes address Evap emissions but don't usually cause a stalling symptom.
    Have that P0335 properly diagnosed to see if it's the CKP, it's circuit or the ECM itself.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

OBD code P0335 (crank position A circuit malfunction) [ 3 Answers ]

Hi, I've been having problems with a 1.8 nissan primera (petrol) engine light is on OBD returned this fault. Has had crank sensor replaced which improved things slightly, but it's still not 100% and engine light is still on. The nissan dealer cleared the code memory and re-checked the OBD. Same...

Can a P1615 OBD code cause a P0335 OBD code [ 1 Answers ]

2004 Maxima won't start after battery was disconnected for 5 days while tranny was being replaced. Turns over fine and dies. I get a P1615 NATS Malfunction code (security system issue) and a P0335 Crankshift sensor circuit problem. Is the 1615 issue causing the P0335 issue or does the crankshaft...

P0335 obd code. [ 1 Answers ]

What is OBD code P0335?

2005 infinity g35 p0335 code [ 1 Answers ]

I have a g35 with a p0335 replace sensor from dealer and code still returns . Check wiring to ecm reference signal at crank sensor is higher then at ecm . Did an ohm test on wire all is good . Does any one have an idea . Thanks jimmy

View more questions Search