Ask Experts Questions for FREE Help !
Ask
    lenrep's Avatar
    lenrep Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 15, 2011, 10:14 AM
    Intermatic t104p33?
    My Intermatic T104P3's clock stopped working. All systems go when turned on manually. Can a guy who is all thumbs fix this?
    chaosmaster1's Avatar
    chaosmaster1 Posts: 294, Reputation: 12
    Full Member
    		  
    #2

    Jul 16, 2011, 04:08 AM
    Yes you can fix it if you are handy with a screwdriver, buy a new intermatice timeclock insert. Make sure to get one that is identical. Then transfer each wire from their location to the same location on the new timeclock. Pull out the old one and put the new one in it's place and you are good to go. Make sure to turn the power off first
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Intermatic t101 timer troubleshooting [ 5 Answers ]

Thanks in advance to anyone kind enough to answer: in re: T101 --if the manual lever is in the "on" position, does that mean the automatic functions are over-ridden and therefore the T101 is "out of the loop" until that switch is changed to the "off" position? --can the T101 be functional (eg,...

Intermatic T101 [ 2 Answers ]

I am working on an Intermatic T101 timer. The unit is not turning on the lights at the expected time. I inspected it and saw that motor is not rotating and replaced it just today, unfortunately the motor is still not working rotating. I left the lights powered on by use of the 'manual on position'...

Intermatic p1353me protection [ 0 Answers ]

Hello, I recently installed an Intermatic P1253me Timer and was told by my local pool store that the timers tend to go out when hit by lightning strikes or power surges. Has anyone else seen this issue? Is there anything I can do to wire in some sort of surge protection? Thanks

Wireing a intermatic t 103 for 220 [ 0 Answers ]

Can you explain how to wire this timer for 220 with 3 15 amp loads. I need a diagram or a simple explination. Any help would be appreciated, thank you.

Intermatic Clock Timer Installation [ 2 Answers ]

My clock on an Intermatic T101P3 timer went belly up and I got a new 110V model. However the problem with the new unit is that the output gear location is slightly different relative to the two mounting holes. This means that I can bolt the clock onto the body, the gear doesn't mesh and driver the...

View more questions Search