Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Need to change ballcock in toilet cistern
[ 11 Answers ]
How do I do this - need to do it because existing ballcock is covered in limescale and toilet flushing very slowly
Toilet Flushing: tank drains, toilet doesn't flush, brand new toilet.
[ 4 Answers ]
I read the other postings, and most of the problems came in with old toilets. Mine is brand new (within a year old) and I just moved in to my new place. The condo has 2 identical toilets and the other flushes just fine. I have mimicked the settings of the working toilet and still can't get my...
How to change pipes and move toilet
[ 1 Answers ]
We need to move the toilet back 4 inches towards the bathroom wall. How do we cut and change the drain pipes and can we replace the drain with new plastic pipe? We have already cut around and through the subfloor and exposed about have about 2 feet around the drain. Thank you in advance.
Toilet replacement and floor height change
[ 1 Answers ]
I am going to be setting a new toilet in our addition and need help. I needed to level the floor as there was over an inch and a half between the old and new areas of the bathroom. After all is said and done, the old cast iron flange is almost two inches below the new floor height. During... View more questions Search
|