Ask Experts Questions for FREE Help !
Ask
    Glen8526's Avatar
    Glen8526 Posts: 1, Reputation: 1
    New Member
     
    #1

    Jul 11, 2011, 04:48 PM
    What would make a 1991 chevy corisca not crank?
    It turns over but won't catch. It is almost like it is not getting gas but it smells like it is flooded. It is a 3.1 multiport fuel injected
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
     
    #2

    Jul 11, 2011, 06:17 PM

    A bad Ignition Control Module could do it (BWD CBE104Z, with a lifetime warranty, from Advance Auto Parts, $92.39). Easy to install yourself.

    Fuel is building up, since the ignition system is not firing properly. Get this fixed, prior to keep trying to start it, since you can blow the exhaust system off the car from the build-up of gas and/or you can damage the catalytic converter.
    CaptainRich's Avatar
    CaptainRich Posts: 4,492, Reputation: 537
    Cars & Trucks Expert
     
    #3

    Jul 12, 2011, 05:22 AM

    Tx is very correct.
    You may also need to replace the spark plugs due to fouling.
    Also ckeck for fuel getting into the engine oil by smelling the oil on your engine's dipstick. If you smell any gas smell, change the oil and filter before running the engine. Gas does not make a good lubricant for engine bearings.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My 2001 chevy venture will turn over but won't crank what is the matter? [ 2 Answers ]

My wife was driving to work. She noticed a loss of power then the engine died. I knew she had a vacuum leak so we fixed that problem but the engine will only turn over. It won't crank.

1974 Chevy truck will crank but won't start [ 10 Answers ]

Truck lost power while driving down road. Will crank now but won't start. I replaced ignition coil, point and condenser... roter turns. Any suggestions?

1992 chevy 1500 p/u won't crank [ 2 Answers ]

My p/u would at times not crank at all. Then after waiting a couple minutes it would. Now it won't at all. It has a sufficient charge. I was told it could be the starter. Also, because it would idle irratically, they said it could be the computer.


View more questions Search