Ask Experts Questions for FREE Help !
Ask
    marktdawn's Avatar
    marktdawn Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 11, 2011, 06:51 AM
    Craftsman 16hp rider carburater problems
    I noticed gas dripping from the carburetor area and when I took the cover off it waas pumping gas and the mower was off. Any reason why this would happen?
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Jul 11, 2011, 07:33 AM

    Is your gas tank at or above the carb level? This could be caused by a sticking float or needle and the gas is allowed to flow and continues because its gravity fed.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Mower will nopt disengage on a Sears 16hp rider with 42 [ 1 Answers ]

I have aSears rider with 42" cut and the mower will not disengage. It is a mower with a lever that you push up and lock in place to engage the mower. There is a cable on the lever with a spring on the end of it that is hooked to the mower deck. When I pull on it, the mower disengages. Is it...

Craftsman Rider Problems- Battery or Starter? [ 1 Answers ]

My Sears 18 horse rider mower turns over but it does not seem to have enough power to turn the flywheel fast enough to start. The starter starts to get hot, and the battery goes down. When I jump it with my car, it does not make a difference. My question. Is it the starter or the battery? Thanks...

Craftsman rider [ 2 Answers ]

I have a craftsman riding mower. When it was given to me it wouldn't start. I got it to start but now when I put it in gear it won't budge?? I know it is probably something simple that I am missing. Please help me and my grass!

16hp craftsman tractor [ 1 Answers ]

Keeps blowing 30amp fuse after a few min any idea thanks

View more questions Search