My huskee supreme will not let me engage the belts for the blades to cut

wages5354 Posts: 1, Reputation: 1

New Member

Jul 10, 2011, 09:11 AM

My huskee supreme will not let me engage the belts for the blades to cut

Model number 1d244h10404 42 in cut huskee supreme

DG Posts: 1,375, Reputation: 109

Ultra Member

Jul 10, 2011, 05:38 PM

Could you give a few more details please. What exactly does it do when you engage the blades ?

Add your answer here.

Check out some similar questions!

Blades don't engage [ 0 Answers ]

I have a L2548 john deere lawn tractor. I have check sit switch and replace. My pto switch came on but quit, came on and quit, then wouldn't engage again. What could it be? I check all the electric and fuse, however, I didn't replace fuse,

Why does my 20 HP mower cut out when I engage cutting blades [ 2 Answers ]

Why does my 20 HP mower cut out when I engage cutting blades. I have just cleaned and sharpened blades and under carrage

Belt Diagram for Huskee 42"cut [ 2 Answers ]

I have a 1995 Murray Huskee Lawn Tractor, 42" cut... can you provide the belt diagram for replacing the belt... thanks!

Blades will not engage [ 2 Answers ]

We have a 2003 Craftsman riding mower. The mower will start but you cannot engage the gears. Any help?

Blades won't engage [ 1 Answers ]

I have a Rally, made for Craftsman, model 18544B, 18.5 HP Briggs, 42 inch cut. I am told it was made byAYP. Blades have stopped engaging. I have replaced the PTO switch. Following the wires some lead to a plug in into the mower that is in the base of the frame on the right side, just above the...