Ask Experts Questions for FREE Help !
Ask
    tamms_1965's Avatar
    tamms_1965 Posts: 4, Reputation: 1
    New Member
    		  
    #1

    Jul 7, 2011, 02:10 PM
    Fan wiring?
    Hi, this is the 4th ceiling fan I have replaced but I am having trouble with the wiring. At the ceiling box there are two sets of wires: 1 set (black, white, copper/ground) from the power source, and another identical set to the switch. My fan has the usual black, white, striped, and green ground. What gets connected to what? Just when I think I have it figure out, I make myself confused again. Thanks for any help.


    Tamms
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
    		  
    #2

    Jul 7, 2011, 02:39 PM

    ..
    Attached Images
     
    tamms_1965's Avatar
    tamms_1965 Posts: 4, Reputation: 1
    New Member
    		  
    #3

    Jul 8, 2011, 04:18 AM
    Comment on hkstroud's post
    Thank you!
    tamms_1965's Avatar
    tamms_1965 Posts: 4, Reputation: 1
    New Member
    		  
    #4

    Jul 8, 2011, 04:28 AM
    Comment on hkstroud's post
    The diagram has disappeared:(
    tamms_1965's Avatar
    tamms_1965 Posts: 4, Reputation: 1
    New Member
    		  
    #5

    Jul 8, 2011, 04:34 AM
    Comment on hkstroud's post
    Just kidding... found it.
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
    		  
    #6

    Jul 8, 2011, 05:16 AM

    I was editing to make the black with white stripe wire neater.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Wiring bath fan with light/fan combo. Want to operate them on separate switches. [ 1 Answers ]

I have power wire with a black/white/ ground. The switches have their own wires with Black/ White wires. The fan unit has two plugs one for the fan with a blue wire and a white wire, and the light has a black wire and a white wire.

Wiring hunter fan and light /light to 3 way and fan to on off wall switch [ 4 Answers ]

I now have both fan and light connected to a three way switch. It works fine. I would like to keep the three way with light, and use the fan on another on/off single switch. A three way duplex would do this. The question is, will I have to run another 12/2 line to the fan And can I use the other...

Hunter fan wiring model 26107 light fixture wiring sequence [ 2 Answers ]

There are 4 lights Each light has a bnlack and white wire coming from it. The light switch has a bule wire, a red wire and a black wire from the main housing. There is also a white wire coming from the main housing. The fan operates fine I cannot get the lights to go on. What is the wire sequence?

Wall Switch Wiring to Fan- Junction box In Fan Ovhd [ 2 Answers ]

I have an older home with a Hunter fan that stopped working. I took down the fan and noted that there were 5 sets of wires coming into the metal overhead box. Found hot black wire feed from main breaker and traced out 3 other sets that fed various outlets, overhead light in next room, etc. Final...

Wiring inline duct fan to furnace fan goodman gmp100-4 [ 2 Answers ]

How do I wire my inline duct fan to my Goodman model gmp100-4 gas furnace fan so that the inline duct fan comes on and off when the furnace fan does? I understand that I need a relay from the inline duct fan but don't know where to connect the relay to the furnace.

View more questions Search