Ask Experts Questions for FREE Help !
Ask
    beta989's Avatar
    beta989 Posts: 1, Reputation: 1
    New Member
     
    #1

    Jul 5, 2011, 02:07 PM
    Sears wall furnace 600 series
    What is the BTU output rating of the Sears wall furnace 600 series?

Check out some similar questions!

I have a Sears 600 pilot free wall furnace, model # 867 734680 [ 1 Answers ]

I have a Sears 600 pilot free wall furnace, model # 867 734680. I do not know it's age. This winter, when using the heat, the fan would occasionally not function. Unit would get hot, but no fan to blow the air. This summer, the fan was working OK to circulate the air, until recently. Now when...

Sears Series 600 Wall Furnace Manual/Wiring [ 1 Answers ]

I purchased a property with the Sears Kenmore 600 Series Model 867.733531 wall mounted natural gas heating unit that isn't working right. The burner starts when I switch it to automatic, but the fan won't start and the heat doesn't shut off on high heat. The fan only comes on in manual mode. I...

Sears auto heating series 600 air conditioner [ 0 Answers ]

We have an older series600auto heating mod#86776762, problem is the heater stopped putting out warm air while the fan just stayed on, could not get it switched over to the a.c. either, just the fan. Replaced the thermostat still the same thing just the fan on, had to unplug the unit inside the...

Sears wall furnace 600 series [ 1 Answers ]

I recently had a problem with the thermocouple not allowing the pilot to stay on. That's fixed. Now.. the furnace takes a long time to heat up... approx. 4-5 minutes before the fan will even turn on and the air blowing out doesn't feel very warm. The furnace ran for 45 minutes and did not heat...


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.