Ask Experts Questions for FREE Help !
Ask
    james_bond_007's Avatar
    james_bond_007 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 4, 2011, 05:28 PM
    Where is the reset button on Harbor breeze ceiling fan?
    We had a power outage and our hampton breeze ceiling fan is not working. Tried circuit breaker to no avail. Lamp & fan does not turn on manually or with remote. Is there a reset button located on the ceiling fan itself?
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
    		  
    #2

    Jul 4, 2011, 05:53 PM

    Never heard of a reset button on a ceiling fan?
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #3

    Jul 4, 2011, 07:37 PM

    Harold is correct, no reset nowhere. Check the power at your canopy with a meter. We had a power outage and then only 120 of our 240 vac came back on.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Harbor Breeze Ceiling Fan [ 2 Answers ]

I have a Harbor Breeze Ceiling fan that has a frosted top light (kind of like a night light). I cannot figure out how to get the frosted glass off to replace the bulbs. This piece is above the blades. Any help would be appreciated!:)

Harbor Breeze Ceiling Fan [ 1 Answers ]

I have the pewter Harbor Breeze ceiling fan that has the light kit on the ceiling, then the fan blades and then the four separate lights. I need to know how to change the lights on the top kit... it seems impossible. :mad:

Harbor Breeze Ceiling Fan [ 2 Answers ]

HELP PLEASE... there are 1,000 holes in the Cheshire Harbor Breeze motor fan where the flanges should go. I can get 4 blades on without it rubbing but it is a 42 inch 5 blade set up. Does anyone know where I can get a close up picture that will show this models motor so I can distinguish where...

Harbor breeze ceiling fan [ 1 Answers ]

I replaced the pull switch for fan motor. In the process of rewiring the new pull switch, the black wire from old switch was not connected, so when I replaced with new switch I connected black wires. The light works but fan doesn't. The switch is a 4-wire pull chain switch.

Harbor Breeze ceiling fan [ 1 Answers ]

I purchased a Harbor Breeze ceiling fan. On the remote on the wall it has an on and off switch AND a on and off button. The switch doesn't seem to do anything. I am also trying to figure out how to change the direction of the fan to no avail. My builder threw away the box and directions. Is there a...

View more questions Search