 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Ceiling fan remote control problems?
My buddy just installed a litex remote into my Hunter fan for me. The problem is, the fan is a four speed fan, and the remote only has 3 speeds. This wouldn't bother me, except the "High" on my remote only turns the fan on to its medium speed. I can't get my fan up to its fastest capability. As I live in Florida, this is a problem. Is there anything I can do? Thanks.
|
||||
Check out some similar questions!
Just installed a hampton bay ceiling fan with remote control.. the remote control works on the lights to turn them on and off but will not turn on/off fan or contol speed. What's wrong.
Harbor Breeze Fan & H. B. Remote bought @ same time in mid-2006. Is installed in room where fan and room get only occasional use. Battery changed at least each 6 months even if it is still working fine. Never had a leaky battery in remote. FAN ITSELF HAS NO PULL CHAINS. Remote has only two...
My friend got a remote control fan that would not run I checked it out and replaced a burnt out capacitor. Now the fan only runs reverse. The fan is strictly remote only can I do anything like switching wires to correct this?
A few months ago I installed a new remote control (no chains) ceiling fan . Surprisingly had a burned light bulb already (mini halogen) It was suggested on an internet post that my voltage may be high an I could purchase a 130v bulb instead of a 120v. So because I was too lazy to open up the fan...
Before I break the darn thing, can you tell me if the back panel comes off or if I have to unscrew the top and bottom screws?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
