 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
I have a 1993 model 1325 with a kohler engine cub cadet.
I got it used runs great I love it but it has 3 belts and the pto belt broke I don't know how to replace it properly the manuals I have for it only show how to replace the deck belt.we put the knew belt on and it runs but won't go into reverse unless I turn it off and I here a click towards the back also I have a hard time trying to shift gears while moving.any one out there that can help me ?
|
||||
Check out some similar questions!
I have a 2000 cub cadet 2166 with a kohler 16 hp engine - it starts, idles fine, but when I throttle up past 1/2 throttle it chokes out and dies. Any ideas?
I have a problem with the points keep getting pitted up and I have a no spark clean them and it runs.. my question is if I convert it to electronic ign. Will that take care of the problem? Or is there a different problem I am not thinking of? Thanks for the help
My GT3100 Cub cadet starts up just fine, but after about 1 minute, it dies like the safety switch has engaged. It has a kohler 23 HP engine. I checked the only know safety switches I have (seat, etc) and they seem to be OK. It will start right back up, run for 30 seconds, and die again. I am...
My GT3100 Cub cadet starts up just fine, but after about 1 minute, it dies like the safety switch has engaged. It has a kohler 23 HP engine. I checked the only know safety switches I have (seat, etc) and they seem to be OK. It will start right back up, run for 30 seconds, and die again. I am...
Model 2415, engine cuts out when PTO switch is engaged, OR, when simply taking it out of park and pressing on the forward pedal. Any ideas? Thanks!
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
