Ask Experts Questions for FREE Help !
Ask
    theresawiid's Avatar
    theresawiid Posts: 1, Reputation: 1
    New Member
     
    #1

    Jun 23, 2011, 11:08 AM
    Craftsman Automated garage door opener model # cannot find?
    Hi can u help me my garage opener just won't open or close via the remote or the main switch... the sensor lights are on one green the other kind of yellow orange ,checked the fuses they OK on the main circuit board the light bulb comes on when I click the remote or the main switch, but nothing no sound nothing ,I did notice once the light goes off and I walk pass the sensor the light does not come on and at the back where your program the rmote on the opener there is a small light that blinks all the time
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
     
    #2

    Jun 23, 2011, 04:13 PM

    I would try turning off breaker or unplugging for 15 seconds or so, then back on and check out the light, you may have to relearn your remotes or keypads, do you have a model number?
    Devin1212's Avatar
    Devin1212 Posts: 1, Reputation: 1
    New Member
     
    #3

    Sep 22, 2011, 05:06 AM
    I think you can take help of locksmiths. Sometime they even have solution for such kind of problems



    24 hour locksmith San Diego
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
     
    #4

    Sep 24, 2011, 06:08 AM
    I think a Technician or Electrician should be able to figure it out over a Locksmith.
    If the Door was closed and you can't get in, then Locksmiths have a bypass for Garage Doors.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Code reset on Craftsman garage door opener [ 8 Answers ]

I will be moving into a home that was a foreclosure and there are no remote openers that came with the house, but a WIRED keypad is mounted on the outside. Can anyone give me the instuctions to reset the keypad code so the previous owner cannot open the garage door?

Craftsman garage door opener keeps opening when trying to close... [ 3 Answers ]

It's as if there's something between the two eye beam fixtures at the bottom of the door. Opens fine. But try to close and it reverses direction immediately. The only way to close it is by holding the button until the door is all the way down. The unit is from May '94, is 1/2 hp, model#(?) is...

Craftsman Garage Door Opener light not working after new door installed [ 9 Answers ]

I have a Craftsman Model 139.18054 Garage Door Opener and the light has been working since it was (professionally) installed 7 or so years ago and up to last Monday when I had a new garage door installed. The installer said they did not do any thing to the unit except attach new safety sensors and...

Can not find model # for garage door opener and need tgo reset password [ 2 Answers ]

We have a Craftsman Keyless Garage Door Opener that we do not know the entry code to and do not have the manual ( just bought the home) I have looked EVERYWHERE for the type of opener and any other numbers on the keypad to help me reset it and nothing works. The only set of number I have are...

Craftsman Garage door opener [ 1 Answers ]

How do I reset the keyless entry password on my garage door opener? It's a craftsman 1/2h.r. Everyone keeps telling me to press the reset button on the unit, but there is no reset button on the unit nor the keypad??


View more questions Search