Ask Experts Questions for FREE Help !
Ask
    debbie64's Avatar
    debbie64 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 21, 2011, 08:40 PM
    Tanning bed power problem
    I have a sunstream bronzarium tannung bed. I am having a problem. The power to the top canopy is not working. It is a older model. The hydraulics for the lift works to operate the canopy but no power going through the rest , no lamps are working. This was a coin operated bed, electrician disconnected the coin box and tied it in the direct to the 220 box.what do I do now to get my power back in the canopy. Please help me
    donf's Avatar
    donf Posts: 5,679, Reputation: 582
    Printers & Electronics Expert
    		  
    #2

    Jun 22, 2011, 06:59 AM

    Debbie,

    Good morning and welcome to the forum. How is Canada doing this morning?

    You have appended to a post that is almost one year old. I am going to request that your question be set up as a new thread, that way more folks will look at it because it is new.

    With that in mind, without a schematic of the bed's electrical system, there is no way anyone can guess at the failure over the Internet.

    If you do not mind, I will also have this item shifted to the appliance forum.

    This forum would deal with the electrical systems that feeds the 240 V receptacle that your bed plugs into.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Tanning bed wiring [ 1 Answers ]

I have a tanning bed that has a 3 prong male plug - I need to wire an outlet with 20amp service - will I only need to run a 12/2 wire - using the white and black as hot??

Tanning Bed Catastrophe! [ 4 Answers ]

Ok, I just started going to the tanning bed trying to get ready for a wedding I am in in May. Apparently I am the worlds WORST tanning lotion applier because even when I think I have it rubbed in all the way, I end up with an uneven tan and blotches. So now I have big blotchy spots on my legs...

Wiring a tanning bed. [ 3 Answers ]

We are trying to hook a 220 volt, 100 watt tanning bed. We have a 20 amp breaker and the wire recommeded at home depot was a 12/2 with a ground. Will this wire work or do we need a different size?

Tanning bed [ 12 Answers ]

Is it really bad? I have been getting tanned for years... I am worried now.

View more questions Search