Ask Experts Questions for FREE Help !
Ask
    epaminon's Avatar
    epaminon Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 21, 2011, 09:05 AM
    PC 1864 partitioning?
    PC 1864
    I want to do the following:
    Zones 1, 2 on partition 1
    Zones 3, 4 on partition 2
    Z 5, 6 on part. 3
    Z 7, 8 on part. 4

    How can I do that? Thank you.
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #2

    Jun 21, 2011, 03:55 PM

    I don't do much Partitioning, and work more with the PC5010/1832.
    But the least you will need to do is in Location (000) at each Keypad Enroll as:
    KP1 will be 11 (Partition1/Slot1)
    KP2 will be 21 (Partition2/Slot1)
    KP3 will be 31 (Partition3/Slot1)
    KP4 will be 41 (Partition4/Slot1)
    And in location 201, enable 1,2,3 and 4.
    Are you using Keypads, or a zone for arming? FOB's are also possible.
    If Keypads, you may need 1 of 2 delay times for Zones 1,3,5 and 7.
    01 for delay one's time or an 02 for the second delay time.
    I'm guessing, is this for 4 offices, each with an Entry Door, and 1 motion?
    Good Luck
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Partitioning my drive [ 6 Answers ]

I want to partition my HDD and its my first time doing it. I tried doing some research online about it but I am really unsure so I figured I would ask for help here. Some basics. I am running XP with a 300Gb HDD. I built this PC myself and when I set it up I just created the 1 partition, but...

Partitioning 160GB HD [ 3 Answers ]

What is the best method of Partitioning 160GB HD

Partitioning [ 6 Answers ]

How do I partition my computer I have a 180gb hard drive

Partitioning Problem [ 4 Answers ]

Hello I could really use some help on this one please I am stumped and do not know what to do from here. I have a computer that was partitioned two ways. The first partition was win 2000 ntsf. I deleted it and was able to create a primary dos partition. My problem is when I display partition...

View more questions Search