Ask Experts Questions for FREE Help !
Ask
    Dmoore14's Avatar
    Dmoore14 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 21, 2011, 03:07 PM
    I am looking for the low pressure switch on a 2006 equinox.
    The clutch engages but quickly disengages. I have checked the freon and changed the high pressure switch.
    CaptainRich's Avatar
    CaptainRich Posts: 4,492, Reputation: 537
    Cars & Trucks Expert
    		  
    #2

    Jun 22, 2011, 10:49 AM

    You may want to thoroughly inspect that system. I believe there is only one switch that communicates system pressure to the HVAC control module and PCM.
    Check for HAVC diagnostic trouble codes and review HVAC module data to ensure that the system is "seeing" what it needs in order to operate.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

2006 Chevy Equinox A/C not blowing? [ 7 Answers ]

I have a 2006 Chevy Equinox and after driving for about 15 minutes the air conditioner almost completely stops blowing. I can here it trying to come out and it sounds like it is restricted somehow. Sometimes no air comes out at all. But I can hear it trying and little white specks come flying...

Low oil pressure warning light comes on 2006 f350 ford 6.0 diesel [ 2 Answers ]

My low oil pressure signal appears on the dash the gausge drops to 0 at idle but goes back up when I rev the engine. I turn the engine off for a minute and restart the low oil pressure signal is gone and every thing looks OK for about 8 days and it will appear again turn engine off and it goes away

Pump pressure switch does not turn on with low pressure [ 0 Answers ]

I lost water in my home overnight. The pressure gage reads about 8 PSI. If I use the lever on the pressure switch to close the contacts, nothing happens. Actually, the pump controller box, makes a buzzing sound for a couple of seconds, but that's it. Does anyone have any thoughts? I don't...

Low producing well with pressure switch [ 3 Answers ]

Last year my plumber put a pressure switch on my well because we had some close calls with the water running dry. He did it to save the pump from burning out. I have a 536 foot deep well. It supposedly produces 350 gallons a day, which is considered low. Recently I had a family move into half of my...

Low pressure switch [ 2 Answers ]

When the unit is turned on in the inside the outside unit is not responding. I believe it is low on freon which is preventing the low pressure switch from coming on. When this switch is pressed manually the unit comes on.

View more questions Search