Ask Experts Questions for FREE Help !
Ask
    smorris481's Avatar
    smorris481 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 21, 2011, 09:14 AM
    Expansion tank on well pump
    Would a defective tank cuase hammering of the water
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
    		  
    #2

    Jun 21, 2011, 06:06 PM

    Yes, it very well could. As a water logged pressure tank will cause the pump to kick on and off very quickly, it can lead to water hammer throughout the home.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How does well pump and expansion tank operate [ 10 Answers ]

My question is how does an expansion tank work with a well pump and how do I install it into the well pump system I have now? I manually turn the pump on and off. However, I understand I can enable the pump to operate automatically if I install two things a relay and expansion tank. I understand...

Frozen pipe from well pump to tank, tank problem, burned out pump? [ 0 Answers ]

Help. Frozen pipes have been heated in 50+ degree housing for the last 10 hours. Tank charge reading 36 PSI (bladder tank), pressure gage reading 40 psi, open valve next to gage and no water. Pressure gage was originally reading zero prior to application of direct heat on pipe. Am I looking at a...

Expansion tank [ 1 Answers ]

Hii,please help me,I want to know the physical meaning of " the expansion tank of the chilled water system" and how it works , the theory or principle of its work, its components and any site that can help me, and thanks a lot.

Expansion tank [ 1 Answers ]

If I install a water pressure reducing valve on my main line for my hot water heater,do I need to install an expansion tank for my hot water heater?

View more questions Search