 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Central air with faulty heating element
I discovered that the heat element is always on,when my a/c is kicked on.
Until I can get this repaired, do I disconnect the white wire at thermostat, or pull the heat side disconnect at the air handler? There are two disconnects one marked heat, the other cool. I don't want to cause a/c malfuntion. |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Frigidaire Furnace Gas Forced hot air - inducer on, no glow in ignition element, two red flashes on circuit board indicating pressure switch fault - took off the connecting pipe between pressure switch and draft inducer and tried to clear inducer nipple of possible debris with a piece of wire -...
My central air unit quit on me tonight. It made a loud pop and quit and I checked all the breakers . Now My thermostat is blank and I can't even get the fan to come on manuely
Good Day, I recently changed my thermostat from a White Rogers to a Hunter programmable model 44260. I connected the system myself and now realize that the heat is not coming out of the vents. The fan is blowing but cool air. I have six wires coming out of the wall plus a jumper on the thermostat....
We have hot air central heating - new last year, very efficient if not a bit noisy. BUT it doesn't really warm the bedrooms. The air duct only extends to the hall upstairs, the idea being that we leave the bedroom doors open to let the air go in - but it is not enough. What could we efficiently...
Constantly having to bleed the radiators to get air out of the pipes. Originally told it was sludge and paid a fortune to get it done but still no joy. ANYONE HAVE ANY IDEAS.
View more questions Search
|
