 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Can someone help me I have a 92 ford ranger xlt aircondionting nor heater works was working about a week ago and all of a sudden both stopped work fan blows hard but no heat or coolness someone please help or give me suggestions if possible have already changed out console switch didn't make a...
Do I need a scan tool to clear check engine light on a 92 ford ranger 2.3 liter after its been fixed or is there another trick?
Does the harmonic balancer need to be removed to install a new timing belt on a 4 cyl. Ford motor 2.3 1995
2001 Ranger. I found dangling down from left side rear a hose with a cilp. It was attached to the axle housing. What is it for and where does it go. It just appears to be some type of air hose but is not attached to anything at other end. Should I be concerned? Thanks
Anyone, what problems does the Check Engine light going on usually indicate? I was coming home tonight, about an hour highway drive and the light momentarily came on, then off, on and off. Not a flicker, but for several minutes at a time. Truck is VERy reliable and there is no indication that...
View more questions Search
|
