Ask Experts Questions for FREE Help !
Ask
    hollancl's Avatar
    hollancl Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 10, 2007, 08:26 AM
    Kenmore Elite Catalyst
    My washer is leaking while it is agitating. Any ideas?
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Feb 10, 2007, 10:39 AM
    Could you be more specific? Where is the leak coming from? Have you removed the panel and looked inside, below while the machine was running? Try that and get back to us.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Elite Catalyst Washing Machine doesn't spin [ 32 Answers ]

I'm not sure if I have the correct model number. Nothing on back of washer. Under lid: SM 9710768-C. This is a Kenmore Elite Catalyst heavy duty, top load, king size capacity, ultra quiet pak, 3 speed motor with 6 speed combinations washing machine. I've tried both spin speeds, but neither work....

Kenmore elite catalyst washer not spinning [ 1 Answers ]

Model number 11020072991 Ok, here's where I'm at. I believe it's the drive coupler? I've disconnected the control panel and fliped it back. I remove the brass colored springs holding on the cover and removed the cover after disconnecting the clamps and hoses needed. Now, I'm stuck and don't...

Kenmore elite catalyst washing machine [ 1 Answers ]

Machine won't work; I am receiving a F 4 and/or F3 message - what does this mean?

Kenmore Elite Catalyst Washer [ 1 Answers ]

My Kenmore Elite Catalyst Washer with digital display was not spinning. I replaced the coupler, the old one was worn. The washer did spin however it made a whinning noise. I ran several loads and now it will not spin again. Any suggestions on what the problem may be? Thanks.

Kenmore Elite Catalyst Washer OL err Code [ 1 Answers ]

I have a Kenmore Elite Catalyst Washer that is reading the error code OL. I do not have model number. I bought the washer and dryer from a used vendor I have looked everywhere for the model #, I guess they might have scratched it off? If anyone has an error code list of this washer...

View more questions Search