Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Wiring diagram for Briggs 18 hp. Ohv V twin and also single cyl. 17.5 briggs ohv en
[ 0 Answers ]
Hi.. I am in the process of changing my single cyl. Briggs 17.5 hp. Ohv engine In my sears 1000 garden tractor 1995-1998.To a Briggs V twin 18 hp.ohv engine 1995-1998 .Everything fits nicely with a little exhaust modification.What I need is the proper way to wire the Briggs V twin engine to the...
Hello quick question about the 12.5 and 14.5 single cyl Briggs motors!
[ 1 Answers ]
Hello quick question,is the 12.5 and 14.5 single cyl briggs that came in the MTD and murray riding mowers the same mounting bolt pattern and are the shafts the same lengths
Briggs 20hp 1 cyl Intek plus - crankcase pressure
[ 1 Answers ]
Hi, I have a 2 year old craftsman lt3000 lawn tractor with a 20hp briggs 1 cylinder ohv intek plus engine. My son (of course!) was mowing a couple of weeks ago and "it just died", reportedly with no noise or warning. I got it to barely run this weekend and immediately noticed a loud popping...
Old Kohler, single cyl. 12 1/2 hp, OHV adjustment
[ 1 Answers ]
I have a 17 year old Cub Cadet lawn tractor with a single cylinder, 12.5 hp, motor with ohv. I have no info on how to adjust the valves. I removed the valve cover on the very top... That's as far as I have able to go. Engine has about 15 lbs. of compression which is low. It is very hard to...
Briggs & Stratton 18.5 HP OHV Intek Plus - Single Cylinder
[ 8 Answers ]
Help! I just replaced the short block on this motor and I cannot get it to run. I've adjuseted both intake and exhaust valves to 0.004 at 1/4 turn past TDC and no luck. It cranks over and kicks back on the compression stroke with smoke out the carb. So far it has not kicked over at all yet. What... View more questions Search
|