Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Cost to remove/replace galvanized water lines in walls with copper lines.
[ 3 Answers ]
The long water lines have been replaced under the house, but not the lines in the wall. What would the cost be for kitchen, 1 full and one 3/4 bath?
Hot and cold water is somehow backwards in shower but water lines are correct
[ 1 Answers ]
I recently installed a new shower valve. I verified (many times) that I installed the hot and cold lines to the correct connections but when I turn the water on to "cold" hot water comes out and when turned to "hot" cold water comes out. I didn't see anything in the manual that indicated it's...
Ge side-by-side refrigerators, water from dispenser tastes moldy
[ 1 Answers ]
I have a GE side-by-side refrgerator that is less than a year old. Very soon after installation, the filtered water from the dispenser started tasting moldy. I replaced the filter, twice, and the problem wasn't fixed. I then bypassed the filter and still the problem wasn't fixed. The water from...
Yellow water from cold & hot water lines on city service
[ 1 Answers ]
I recently bought a house that is ~30 years old. It has copper pipes. When I first noticed yellow water I flushed my hot water tank, but the water problems persists and it occurs even when I'm running cold water. There is some sediment in the water that looks like the iron content in well water,...
Water line connection for refrigerators
[ 9 Answers ]
I'm purchasing a side-by-side refirgerator with a water dispenser and ice maker. The plumber ran a length of thin copper tubing from the sink to through the wall to eventually connect to the appliance. Is that all it takes? Should a shut-off valve be placed on the tubing where it will connect to... View more questions Search
|