Ask Experts Questions for FREE Help !
Ask
    ricjanbor's Avatar
    ricjanbor Posts: 2, Reputation: 1
    New Member
     
    #1

    Jun 13, 2011, 08:25 PM
    Kenmore stackable dryer sounds like metal rolling in drum
    Yesterday, I started drying a load of clothes and it sounded like there was something metal in the drum. I checked and there was nothing. I dried the clothes and the dryer worked fine. The clothing dried, but the sound continued. I thought that I was just missing the piece of metal. However, when I took the clothing out of the dryer, I never found any metal and when I reloaded the dryer, the sound continued. My husband took the front off the dryer and we started it. The sound seems to be coming from the drum area. We are wondering if it might be a belt? The dryer was purchased 18 months ago, but was not installed and put into use until JUly 2010. There is only myself and my husband in our household, so the dryer does not get a lot of use. The dryer is a Kenmore Elite HE3 7.0 cu.ft. Super Capacity Gas Dryer. We use propane. Model# 97872.
    We do not have an extended warranty. We built a home and purchased all Kenmore Elite appliances and the cost of extended warranties for everything was crazy. We have been out of warranty since February 2011.
    Thank you.
    DocRyan's Avatar
    DocRyan Posts: 19, Reputation: 2
    New Member
     
    #2

    Jun 14, 2011, 11:06 AM
    It sounds like you make have something stuck in one of the drum baffles. Check to see if something like a coin got stuck in one of the baffles. It won't hurt anything to have it in there, but you would have to take the dryer apart to remove it.
    ricjanbor's Avatar
    ricjanbor Posts: 2, Reputation: 1
    New Member
     
    #3

    Jun 18, 2011, 08:22 PM

    Thank you for the answer. We had a technician come out and it was a piece of heat tape that came loose on the inside wall and it was hitting the drum. Glad it was a simple fix, but sure sounded like something worse!

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Model 417.94712400 stackable washer/dryer; dryer doesn't heat up. [ 4 Answers ]

Dryer drum rotates, and it responds to the "cycles" dial, but the heating element doesn't heat up. Is there a reset button somewhere, or do I need to replace the heating element, OR? Thank you.

Kenmore stackable washer/dryer [ 0 Answers ]

How to close the panel in the front of the unit? I replaced the door switch but can not close the panel door. Help

Kenmore stackable dryer won't turn [ 0 Answers ]

Hello everyone I'm new to site. I have a stackable kenmore washer/dryer Model 417 98702891 Serial xe03300964 Dryer will not turn. When I turn the on button, there is a faint buzz but dry does not turn I cleaned vent area, vent tube. Is there a reset button or anything. Thanks in...

Kenmore Stackable Dryer/Washer Dryer Squeaks [ 1 Answers ]

We have developed a squeak in the dryer. It does heat okay and clothes are tumbling well. I went online to get the schematics of the dryer drum, but would not know where to start as parts are numbered and not named. Help:confused:


View more questions Search