Check out some similar questions!
Turning on AC blows control board fuse and 24v transformer
[ 15 Answers ]
I read https://www.askmehelpdesk.com/heating-air-conditioning/c-keeps-blowing-fuse-95884.html which was very informative. My issue is with a Carrier Weathermaster 8000 furnace and York AC. The heat works fine, the fan only works fine, I turn on the AC and the LED blinks code 34. I replace the...
Motion Sensor
[ 1 Answers ]
I have an ceiling light fixture in the hallway entrance to my co-op apartment. The swithch that controls this fixture is actually inside my apartment. It would be great if this light came on automatically when a person enters the hallway as this would make it easier to put a key into the lock of my...
Wiring Thermostat-High Voltage to 24v
[ 1 Answers ]
I'm in the process of having my 1941 oil boiler replaced with a new gas boiler, and I want to replace my line voltage thermostat with a 24v programmable thermostat. At thermostat now is 110 with 1 black and 1 white. I know I will need a 24v transformer but don't know exactly how to wire this. Can...
24v transformer bad
[ 3 Answers ]
My 24v transformer is bad on my gas pack heat and ac unit. I replace the transformer 2 months ago... I replaced it again yesterday. This time it went bad in 4-hours. What is shorted to blow the transformer? Also, DC is used to pull the a/c and fan relays, right? Where is the 24v ac... View more questions Search
Add your answer here.
|