Ask Experts Questions for FREE Help !
Ask
    michael_cox's Avatar
    michael_cox Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 4, 2011, 09:58 AM
    Changing windings 480/277v to 208v/120v?
    I have a Generac 480/277 35kva back up generator. We are changing the in coming service from 480/277v 3 phase to 208/120 3 phase. Can the windings on the Generac be change for this new service ? Or do we have to purchase a set down transformer and place it just past the transfer switch on the out going feed when the generator is running. Also will the transfer switch still work whether incoming voltage is 480 or 208. If not what would we need to do? Any help would much be appreciated.

    Thanks
    Mike

Check out some similar questions!

Transformer has 20 windings 100 secondary windings secondary voltage is 25V [ 1 Answers ]

A transformer has 20 primary windings and 100 secondary windings. If the secondary voltage is 25V, find the primary voltage.

How to get 120v from 208v [ 2 Answers ]

I have 208v 3 phase in my building and to my machine, but I need 120v to run my conveyor. How can I wire it to get 120v off the 208 3 phase wires? I used the green, white and black wires and checking from the ground to each leg I get 125v but from leg to leg I get 211v. Can someone please help me?

Sewage pump windings gone? [ 1 Answers ]

We have a tank in our garden, where all our waist goes from the house. When it reaches a specific level a pump starts and pumps the waist up hill to the mains sewage system. One of our pumps isn't working at all. I've had it out and checked it over. The pump is turning freely. The only thing I...

Changing a 250v receptacle to 120v [ 1 Answers ]

Thanks in advance for taking the time to read this. Basically, I Purchased a new washing machine. The receptacle for the old machine Appears to be, I believe, a 250v receptacle (it has two small horizontal Prongs and a circular (ground) prong)and it attached to a double breaker At the box. The...

120v/208v single phase appliance wiring [ 2 Answers ]

Recently purchased a coffee machine that has the above reqts. I understand that it has 220 and 110v circuits that need power. I also purchased a generator to power this brewer outside. If I use a NEMA L14-30P plug, to connect into the generator, What is the sequence of wiring for the plug three...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.