Ask Experts Questions for FREE Help !
Ask
    sandy35's Avatar
    sandy35 Posts: 7, Reputation: 2
    New Member
    		  
    #1

    Jun 2, 2011, 08:32 AM
    2008 troy bilt bronco: have trouble shifting and stopping w/new drive belt,[lower]
    Tractor won't stop when I apply the brake, and it is difficult to shift the control lever from forward to neutral, to reverse. All else works well as before I replaced lower drive belt. What should I look for?

    Thanks
    DG's Avatar
    DG Posts: 1,375, Reputation: 109
    Ultra Member
    		  
    #2

    Jun 19, 2011, 03:52 PM

    Replace the other drive belt also.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Replacing lower drive belt on Troy Bilt Model Y609H. [ 5 Answers ]

Followed manual instructions exactly. Everything worked fine until I removed the electric PTO clutch. Cannot remove old belt or install new belt on the engine pulley because of three tabs around the pulley that are in the way. Tried to remove engine pulley with a wheel puller but it will not...

Troy-Bilt drive belt, brakes and shifting [ 2 Answers ]

Troy-Bilt Z809H, 24 HP B&S engine, 46" deck, 3 years old, model 14az809h063. I just had the drive belt replaced by an "authorized" repair facility. With the engine off, everything seems fine. I can shift into and out of gear easily and the brake stops the tractor cold. With the engine running,...

Troy bilt lower drive belt instalation [ 4 Answers ]

How do you get the lower drive belt around the belt keeps to get it on the crankshaft pulley?

Troy bilt bronco hard to stop and shift after replacing lower drive belt [ 0 Answers ]

Tractor won't stop when I apply the brake, and it is difficult to shift the control lever from forward to neutral, to reverse. All else works well as before I replaced lower drive belt. What should I look for? Thanks

Troy Bilt Super Bronco main drive [ 1 Answers ]

I have a Troy Bilt Super Bronco 42" deck rider, It has the veri-drive I believe it is called. Yesterday while mowing I had the drive pedal engaged and the mower just stopped and it started smoking from underneath the mower and wouldn't move in forward or reverse. It will go into gear(forw. And Rev)...

View more questions Search