Ask Experts Questions for FREE Help !
Ask
    firetech's Avatar
    firetech Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 1, 2011, 07:56 AM
    Cub Cadet 1800, Hydrostatic with a pulsating pedal..?
    I own an 1800 series Cub Cadet with Hydrostat. Just recently, while mowing, I noticed a pulsating feeling in the "gas" pedal. A few weeks prior, when going up hill, the drive belts would make a squealing sound. Now, my questions are: Could this "pulsation in the pedal" be a drive belt issue? Could this be a transmission issue? Or could this be as simple as replacing the fluid in the tranny? Any help will be appreciated! Thank you.
    DG's Avatar
    DG Posts: 1,375, Reputation: 109
    Ultra Member
    		  
    #2

    Jun 2, 2011, 07:04 PM

    I would check my belts first.
    If okay replace the filter and fluid,
    If this doesn't help might look at the charge pump on the hydrostat.
    Luck
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Cub cadet pto [ 3 Answers ]

This seems to be a common question, but no viable answers work for the pto removal. Does the pulley have to be removed before I can pull off the pto unit? Electric for a 2145 cub cadet. Onan motor.

1620 cub cadet [ 1 Answers ]

The electric clutch will not stay engaged on my 1620 cadet the mower deck will run only if you hold up the switch I have swaped it out with another switch and no difference what or where do I look for the problem it acts like it may be a safety type issue

Cub cadet 1800 [ 1 Answers ]

My cub cadet makes a noise in the transaxle when I am going up hill and stops moving it sounds like a grinding noise can anyone help?

View more questions Search