Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Anode rods
[ 5 Answers ]
We put a new water heater in our farm house in October. A few weeks after installation we started getting rotten-egg smelling water. We changed the anode rod to what we believed to be an aluminum anode rod. Water was good for a few days then started smelling again. We just took that rod out of...
Grounding rods
[ 1 Answers ]
Is there anyway that sombody tell what is the length for ground rods for trailers ,someone told it should be like 8 feet long ,but I find it difficuilt to get that length of the ground rod under the ground ,is there any other way,another person told me that I can connect three shorter grounding...
Grounding Rods
[ 2 Answers ]
I am in the process of installing a brick patio in the back. While digging out the area I ran into two rods with the grounding wire from the house attatched. The tips of the rods were sticking out of the ground slightly covered by mulch. I don't want to move the rods or the patio. My question is,...
Grounding rods
[ 4 Answers ]
First off thanks everyone for all your help so far. I have a question about a grounding rod. Can it be used in place of a water utility connection? My water meter is a good 50 feet away from my house and I am pretty sure that the pipes that run into the house are non-metallic, plus I have no...
Ground Rods
[ 2 Answers ]
I'm about to install 2 ground Rods 5/8 by 8ft. Can anyone give me any hints on how to install these without damaging the rods. Also I heard that general rule of thumb is 8 foot down and 8 foot apart can anyone shed some light on these locations. Any help will be a great help. Thanks again, ... View more questions Search
|