Ask Experts Questions for FREE Help !
Ask
    mamaj2457's Avatar
    mamaj2457 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 29, 2011, 04:15 PM
    Belt keep breaking, pulley running slow
    Put new belt on it, ran fine for about 45 minuetes, and then it eats the belt, pulley running slow
    restoren's Avatar
    restoren Posts: 8, Reputation: 1
    New Member
    		  
    #2

    Jun 9, 2011, 09:59 AM
    Depends on a few things.whats the tractor?how many pulleys?is it the correct belt,and on right?mine had a barring out in one of the mandrels.my father in laws was a idler pulley.keep in mind if it's the mandrel,you should get the pre-built one's.it's almost a 100% chance the mounting bolt's will snap.they are self tapping screws.it should be a quick,easy,and rather cheap fix.well at least cheaper than a ton of belt's.best of luck to you,and I hope this was food for thought.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

LT155 John Deere running slow Drive belt replaced what next? HOW [ 9 Answers ]

I have replaced the drive belt due to the mowers slow speed It is still running slow speed what causes this and what is the fix?

My belt is stuck under pulley for lt2000 [ 1 Answers ]

Hi I have a Crapsman lt 2000 which I wish I had never bought it was such a waste of money. Anyhoo now that I have vented. My belt is stuck under the pulley for the damned blade and I can't get it out because of this little L shaped guard on the deck I have the 3 year service plan but am too...

What causes the drive belt to come of the pulley [ 5 Answers ]

I have a sears craftsm 42 inch electric start riding lawn mower and the drive belt keeps jumping off the pulley, the model number is 944.606180

How to put the drive belt back on the pulley [ 2 Answers ]

I have a craftsman 18.5 lawn tractor and the drive belt has slipped off the rear pulley. How do I get it back on?

Dryer Belt broke and belt tension pulley fell out. Where does it go? [ 1 Answers ]

When the dryer belt broke, the belt pulley fell to the bottom of the dryer. I can't find where to put it back. The dryer is 25 years old. I don't want to pay for a service call. Is there a manual on line?

View more questions Search