Ask Experts Questions for FREE Help !
Ask
    jmlabella's Avatar
    jmlabella Posts: 2, Reputation: 1
    New Member
    		  
    #1

    May 29, 2011, 10:43 AM
    La110 John Deere will not move
    I was driving this mower and it just stopped moving... while driving. Engine runs and blades engage. Tow rod is pushed in and attached to the lever on the transmission. Belt is not broken, has not slipped off pulleys, and appears to be proper tension. Brake is not engaged. There are no foreign objects preventing the free flow of the forward/reverse pedal or rod that attaches from the pedal to the transmission... and it is still attached. Same for the brake pedal... everything is attached normally and no foreign objects. The rear wheels have never been removed, so I don't see the locking pin as an issue. I am completely stumped.
    DG's Avatar
    DG Posts: 1,375, Reputation: 109
    Ultra Member
    		  
    #2

    May 29, 2011, 03:05 PM

    Check the pulley on top of the tranny , I have seen several of these strip insde and not turn the transmission shaft , and it happens like BANG! Stops and nothing.
    Luck
    jmlabella's Avatar
    jmlabella Posts: 2, Reputation: 1
    New Member
    		  
    #3

    May 29, 2011, 08:25 PM
    Comment on DG's post
    Thanks for the reply DG. When the forward/reverse pedal is depressed, the belt stays motionless. If the pulley on top of the transmission assembly was stripped inside and not turning the transmission shaft, wouldn't the belt still rotate through the pulleys? I am getting no belt movement when I depress the drive pedal. Am I missing the point here, or could it be something else? Thanks
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

John Deere L110 won't move after starting [ 11 Answers ]

I too have a John Deere Lawnmower L110 that will start but will not move. I read another that had the same problem but the answer was an obvious one and one that we have tried, pushing the rod in. I have looked at all the belts and they are in tact. I have no idea what is wrong. I hestiate to...

John Deere L110 Starts/ Will not move [ 4 Answers ]

My four year old John Deere had a flat tire. Jacked it up under the tranny housing fixed tire and put all back, now tractor starts fine, runs fine, but will not move forward of back. Has an automatic transmission, was running fine before tire change now doesn't move. It is not the brake and it is...

John Deere LA130 Will not move [ 2 Answers ]

Hello, I am stumped. I have looked at the LA110 "will not move" posts and have tried all the suggestions but nothing is fixing it yet. I have a several year old JD LA130. I was in the process of mowing the lawn when I slowed down to turn, when I finished the turn I could not accelerate, or...

John Deere X320 - starts but won't move [ 1 Answers ]

Lever in rear is engaged. Doesn't appear to be the issue. Battery died, had charger on over the weekend but wouldn't take a charge. New battery installed and works to start but when you step on forward/reverse pedals you get no response. Thanks in advance.

John Deere L110 Starts Will Not Move [ 2 Answers ]

My L110 starts but will move neither forward or reverse. I've check the free-wheeling gear (OK) and the brake lock (OK). Still will not start. I was attempting to drive up a steep incline (about 20% grade) with a flat rear tire. After spinning for a while, I shut it down. Now after replacing the...

View more questions Search