Ask Experts Questions for FREE Help !
Ask
    vabeach's Avatar
    vabeach Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 27, 2011, 07:42 PM
    Uc7070t remote control?
    Help Please, I have these ceiling fans in three rooms of my home. They were here when I bought the house. The living room fan stopped working when the bulb blow out. I replaced the T6 Circline bulb today and the remote battery as well as flipped all the circuits. What can I do?

    Thanks
    No A/C
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    May 28, 2011, 08:33 AM
    When you replaced the t-6 did the light come on? If not, sounds like you have a loose wire or a short out in the fan assembly wiring.
    donf's Avatar
    donf Posts: 5,679, Reputation: 582
    Printers & Electronics Expert
    		  
    #3

    May 28, 2011, 08:52 AM

    I also suspect that there is a wiring. Have you verified that the breaker for this circuit has not tripped and needs to be reset?

    You said you have three fans, are all of them failing or just the one?

    Curious, are you in Virginia Beach, Virginia? If you are, hi neighbor.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hampton Bay Remote Video/fan Remote Control [ 16 Answers ]

I have a Hampton Bay Video & Fan Remote Control (Model #UR8050T). It has been working fine for about 2 years until it recently began malfunctioning. It still operates the television, but the use of the fan/light features has stopped working. It will not turn the fan on or off, and the light is...

How to change ceiling fan remote batteries on a hamilton bay remote control unit [ 3 Answers ]

Before I break the darn thing, can you tell me if the back panel comes off or if I have to unscrew the top and bottom screws?

How to control 3fans on 1 remote control [ 2 Answers ]

I have 3 fans control by 1 switch on wall I want to control the 3 by one remote control hampton bay But only 2 responde to the control the other one does The opposite (if I turn on the light only 2 comes on and The other comes off ) the 3 recivers has the same code As well...

Remote control [ 3 Answers ]

We have a Northport III ceiling fan and the remote control has stopped working. The fan and light continue to work fine when turned on manually. I have changed the battery in the remote, I have checked to see that the combinations on the remote and on the receiver are the same, but can not get this...

View more questions Search