Check out some similar questions!
No Fan Start
[ 5 Answers ]
I have a rudd air conditioner 12 seer, when I have the heat set and starts, the handler is working find but the fan outside does not start, I have to go outside and hit a push in a red knob and then it starts. What seems to be the problem that the fan does not start by itself. Thanks
T-start fan on/furnace blower on, AC w/fan on/auto, blower off
[ 8 Answers ]
If no cool or heat, just fan on, there has blower start in furnace; While in air conditioner, regardless fan on or auto, there will be no indoor blower on at all; While outside condenser and its fan seems fine. I lready jump wires G, RC and Y in T-start, won't see any difference. By the...
Condenser fan won't start
[ 3 Answers ]
When my unit kicks on, the condenser fan won't start running unless I give it a nudge. Once I start it spinning, it runs fine, but when it stops, it won't start on its own again. I took the motor off & brought it to a repair shop. He checked it out & said it's good, but capacitor was bad. Got a new...
Induction Fan Won't Start
[ 1 Answers ]
I turned on my Heil furnace for the first time this fall, only to find it didn't work. After looking at the furnace, I heard a slight hum, like the motor was trying to engage, but the fan wasn't spinning. I turned the power off and check to see if the fan was jammed somehow, but it spun freely. ...
Fan sometimes won't start
[ 17 Answers ]
Hi, We have a ceiling fan that runs fine, and then all of a sudden it won't start. It never stops once it's going. Any ideas? Thanks. Lisa View more questions Search
Add your answer here.
|