 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
How old is this drier? If it is over 2 years old it probably is dirty and the safety switch has shut down the heat strips. To cure the problem you have to disassemble the drier and clean out all dirt and lint deposits. This means taking out all duct work and washing the parts out including the blower fan. Vacuum out motor. Then replace blown safety which you have to find with ohm meter. DrTom4444
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
My dryer starts just fine but will stop within minutes and won't restart for 30 minutes or more, then repeats. It heats and turns just fine. I changed the thermostat but that didn't help.
Hello I have a sears kenmore 90 series gas dryer. And I was wondering if it has the same kind of fuses as an electric dryer? Because everything seems to work but it does not heat. And I would like to know if it has the same fuses as an electric dryer?
My dryer is a kenmore HE4 about 3 years old. Everything looks fine, except it does not heat up. Checked the exhaust vent and is fine, cheked the heating elements and it looks fine, once I put everything back together the dryer started heating up for awhile, then it went back to cold air. Is there...
I have a Kenmore Electric Dryer. It seems to take much longer to dry than my old Kenmore Gas Dryer. Is that natural for electric to take longer, thanks
View more questions Search
|
