Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Wiring a reversible ceiling fan?
[ 1 Answers ]
Would appreciate a wiring diagram or instructions for a reversible ceiling fan with low,medium and high speed,No lights. One switch has forward-off-reverse command,the other low,medium,high Speed. The fan has 3 wires only.This a cheap Made in China fan,80 cms diameter.
Swapping Dual Light Switch for Dimmer/Three Position Switch for Ceiling Fan
[ 1 Answers ]
I am trying to swap out a dual switch for a switch that has a dimmer for the ceiling fan light and a three position switch to control the fan. The original wiring had white to white on switch, black to black on switch, and one black from light connected to the top switch pole and the other black...
Trying to wire ceiling fan switch and 2-3way light switches for ceiling lht/fan combo
[ 5 Answers ]
I have 1 single pole switch for fan, and 2 three way switches to run light only. The power in is by the double box that will house the fan switch and the #1 light 3way. The other box houses the other three way switch. My fan switch is turning the light on and off, the three ways are doing nothing....
Wiring ceiling fan switch and light switch
[ 1 Answers ]
I had to replace the flywheel on my Hunter ceiling fan and I had to remove the light kit that was attached. After I installed the flywheel, I forgot to mark the wires for re-connection. This is an older model fan. There are five wires coming from the fan motor--brown, blue, white, black and...
Harbor Breeze Ceiling Fan - Disconnect Remote?
[ 1 Answers ]
My home is wired for a 3-way switch for the ceiling fan light, and a 2-way switch for the fan motor. I purchased a Harbor Breeze model Exetor fan with remote. I'd prefer not to use the remote. Can it be installed to operate from the wall switches only without the remote? Thank you View more questions Search
|