Ask Experts Questions for FREE Help !
Ask
    abuilder2's Avatar
    abuilder2 Posts: 4, Reputation: 1
    New Member
    		  
    #1

    May 12, 2011, 01:37 PM
    Gates belts for Craftsman 917.251472 lawn tractor with 44 inch deck
    I am looking for the Gates belt numbers for the drive belt and deck belts. I believe the drive belt is 94 1/4. The deck belts are 88 and 79.3 inches. All are 1/2 belts.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    May 12, 2011, 02:30 PM

    Sears likes to keep their cards close to their chest. Part #57 in this link is what you need for about $26 but they don't tell you the size, just their part number. http://www.searspartsdirect.com/part...m=57#Partslist If you download the manula or have a hard copy it should tell you the size
    DG's Avatar
    DG Posts: 1,375, Reputation: 109
    Ultra Member
    		  
    #3

    May 12, 2011, 08:00 PM

    There are different width belts, the belts on your mower are 1/2
    Luck
    abuilder2's Avatar
    abuilder2 Posts: 4, Reputation: 1
    New Member
    		  
    #4

    May 21, 2011, 05:39 PM
    Dah Huh Duh Huh Yep That's all folks
    DG's Avatar
    DG Posts: 1,375, Reputation: 109
    Ultra Member
    		  
    #5

    May 21, 2011, 05:41 PM

    What's your deal Bill ?
    You asked if all belts were 1/2 inch
    And I said no.
    abuilder2's Avatar
    abuilder2 Posts: 4, Reputation: 1
    New Member
    		  
    #6

    May 21, 2011, 07:41 PM

    The belts are 1/2 inch. Bad information is not all that valuable.
    DG's Avatar
    DG Posts: 1,375, Reputation: 109
    Ultra Member
    		  
    #7

    May 22, 2011, 07:14 AM

    drive belt 123796X = GB 6895
    deck belt 131290 = GB 6888
    pto belt 154746 = GB N/A
    sorry miss read your ?
    abuilder2's Avatar
    abuilder2 Posts: 4, Reputation: 1
    New Member
    		  
    #8

    May 22, 2011, 08:37 AM

    Thanks for the Gates crossover. That is what I really needed.
    DG's Avatar
    DG Posts: 1,375, Reputation: 109
    Ultra Member
    		  
    #9

    May 22, 2011, 08:39 AM

    Your welcome .
    Sorry about the miss understanding
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Craftsman lawn tractor model 917-273643 troubleshooting [ 3 Answers ]

I can start my mower and it will run for a short time then for no apparent reason it just dies. I can wait a few minutes and it will start again and then repeat the cycle. What is going on. Could it be a defective fuel cutoff valve? HELP

How do I replace my mower deck belt for a 38 inch cut sears craftsman lawn tractor [ 3 Answers ]

How do I replace a mower deck belt on my sears craftsman lawn tractor model # 917.254940

Craftsman 917.273399 lawn tractor repairs? [ 1 Answers ]

Tractor will start and run, but stalls when you let out the clutch?

2003 craftsman model 917.273770 lawn tractor [ 2 Answers ]

Trying to find grass bagger for 2003 craftsman LT2000 lawn tractor 22 HP with 42" deck or cross ref bagger #'s 24979/24989. What other baggers may fit .

MTD lawn tractor deck is cockeyed and shredding belts. [ 4 Answers ]

How do I fix a 1999 MTD Lawn Tractor Deck model “F” that is uneven and shreds belts? The deck lift handle no longer smoothly raises and lowers. It seems to be hitting something. The deck on the deck left hand side does not lower all the way. On the opposite side it goes down nearly touching...

View more questions Search