Ask Experts Questions for FREE Help !
Ask
    jatsma's Avatar
    jatsma Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 14, 2011, 04:25 PM
    Briggs and Stratton Vanguard Starter removal tips are needed
    I have determined that my solenoid is OK and attempting to remove the starter. I have found the 2 bolts that hold it on but need a tip on how to get at the top bolt. I can see it but can't get a socket or wrench on it.

    Any ideas?

    This a verical V twin on my Ingersoll Garden tractor.
    DG's Avatar
    DG Posts: 1,375, Reputation: 109
    Ultra Member
    		  
    #2

    May 14, 2011, 06:51 PM

    Most have a torx head also .
    That's what I take them off with.
    Luck
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

I have a Briggs and Stratton Vanguard V Twin 18 hp motor. [ 2 Answers ]

It is in an woods lawnmower. After I mow for a while It will just stop. What do you think Is wrong with it. Tanks

Briggs & stratton starter motor cog removal [ 1 Answers ]

Is it possible to remove the plastic cog without removing the starter motor from the Vanguard Briggs & Stratton engine as previous posts suggest it is difficult to remove starter motor. Thanks

Briggs & stratton 276012 starter [ 2 Answers ]

I have a 12.0 hp ic ohv 276012 5Bsxs.3442vm briggs and stratton engine on a logsplitter that is maiming me every time I pull start it. I desperatly need a starter for it. The fly wheel has no teeth. Upright starter is needed. Thanks

Briggs & Stratton Starter [ 1 Answers ]

My starter gear was shredded so we took the starter off and replaced the gear and put the starter back in. But when we hooked everything back up it doesn't even try to turn over. Now when we touch the starter relay to the starter it makes a clicking noise but that's it PLEASE HELP

Starter Rewind repair Briggs and Stratton [ 2 Answers ]

I have a Briggs and Stratton 3.75 Spirit motor Model 98902 Type 0131 with a broken recoil spring. I can rewind the cord by hand and still start the motor. However after a year and a half of that I figure it's time to fix this! I am mechanically sound but wanted to know if there is anything I...

View more questions Search