Ask Experts Questions for FREE Help !
Ask
    ljleight's Avatar
    ljleight Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 9, 2011, 07:36 PM
    Replaced battery solenoid clicks is it the starter
    Sears lawntractor
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    May 9, 2011, 08:15 PM

    We need more details but from what you have said so far its likely the solenoid rather than the starter. Have you tried jumpering/bypassing it?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Solenoid clicks, does not engage starter. Hot wired mower started. Would not shutdown [ 3 Answers ]

Solenoid would click, but starter would not engage. I hot wired it and it would start, but would not shut down with the ignition key. Once engine was killed, would not start with hot wire or ignition switch. Solenoid will not click now. I changed solenoid but still no response. How can I verify...

06 softail starter solenoid will not engage. Are there any quick fixes to check before I pull the starter. [ 1 Answers ]

Just a quick question.

I replaced the starter and the battery. It will not start, doesn't even crank. [ 3 Answers ]

I just replaced the starter in my Craftsman lawn tractor. I put in a new battery at the same time. The tractor will not start it doesn't even turn over?

Yanmar diesel solenoid only clicks [ 3 Answers ]

I am having a similar problem with the selonoid on my Yanmar 1700 Diesel tractor. I have a clicking sound and I was told to use a screw driver to by pass the key ignition. When I used a pair of pliers (not good I uess) there was a spark and now there was no clicking sound as a result. So I am...

View more questions Search