 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
I have two BRYANT hvac units. 1075 rpms, 2000 model year
I changed the motor on one of them the other day, at first it wasn't cold, I was told it takes awhile, then the next day, it started getting cold, but now its blowing warm air. And now the downstairs unit has decided to quit blowing air altogether. I noticed a frost on the copper tubing outside, so this morning I turned the fan to the "on" position to see if it was frozen and I could defrost it, but there is no air blowing out of the vents. Could you suggest anything for this problem?
|
||||
Check out some similar questions!
My 1988 Honda accord idles at 2000 rpm and when you put in reverse and it dies what can I do would it run better if I changed the I idle
I Have an older Bryant 6-ton rooftop unit model 580c that will run for a few minutes... shut off but will NOT "cycle" back on for heat. You would have to "re-set" by powering off/on at the breaker panel. I am getting a "CODE #6 Inducer Motor Fault" even though motor seems to be functioning OK. It...
I've found a number of these type of questions in here and I thought I'd post my own, with what I *think* my solution is. I have two geothermal units The first Geo unit has this... Min CKT Ampacity = 25.6 A Max HACR = 35 A The second unit has this... Min CKT Ampacity = 29.6 A
I have a honda civic ex that suddenly idles at low rpms. I just replaced the spark plugs but it still idles at low rpms. Please try and help.
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
