Ask Experts Questions for FREE Help !
Ask
    WinPip's Avatar
    WinPip Posts: 2, Reputation: 1
    New Member
     
    #1

    May 2, 2011, 06:26 PM
    My main sewer line clean out isn't sealed in any way, isn't even threaded.
    I've lived in my home for 3 years, during that time I've found that the previous owners were DIY fanatics that did pretty much everything you can imagine wrong. You should have seen the electrician's face when I called him in after I took down all the walls upstairs. He forbid me to turn on the power until he had cut and capped every line running to the second floor.

    Anyway my latest discovery is that the house has two clean outs to the sewer line. One is properly capped thanks to the guys that changed my hot water heater when I moved in (the previous cap involved lots of tape and a metal plate). That clean out is above the basement floor, two feet from it there is a square 2x2 foot hole that has large rocks at the bottom. I just figured it was something to do with rain water overflow, it never overflowed so I left it alone. Then today I took a shower and wham it was overflowing like crazy. I removed all the rocks and found a second clean out cap on the floor of the pit about a foot or two down. I tried to unscrew it but it came free right away. Below that was a round hole in the cement that leads right into my sewer line. It was actually convenient for snaking and I removed the clog (niece's friggin hair piece from easter) and the water quickly drained.

    But now I've got a hole slightly smaller than the size of a standard clean out in my basement floor with nothing sealing it other than a cap placed over it and weighed down by rocks. It isn't threaded so I can't attach a cap. I'm worried about gas, and from my limited experience with hydraulic pressure I'm pretty sure the hole is actually making it easier for clogs to form by reducing the pressure in the pipe when it is full.

    Has anyone seen something like this? Any suggestions for sealing the hole would be greatly appreciated.. I'm stumped at the moment.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #2

    May 2, 2011, 06:29 PM

    Any chance you can post a picture. This sounds like a true nightmare, great advertising for the home inspector industry though. It really sounds like you need to get 3 plumbers out to give bids on what they say must be done to bring this home to code and a safe level
    WinPip's Avatar
    WinPip Posts: 2, Reputation: 1
    New Member
     
    #3

    May 2, 2011, 06:41 PM
    I had it inspected, sob kept saying things like "well we're not allowed to comment on that due to lawsuits" in my opinion it was a waste of money.

    I've actually repaired or had various workmen repair the vast majority of the crazy crap they did. I thought I was about done then this craziness pops up. My camera is dead but I'll post once it takes a charge.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

I need to locate my main line clean out. [ 2 Answers ]

I know that the city sewer line is behind my home and the water line is in front of my home. My home was built in the 50's. Do I have a clean out? I even know where the pipes come from my bathroom to the ground (single story home with crawl space). How will I know where to dig and how deep to go?

How to find the main sewer line to add a clean out trap [ 1 Answers ]

I am trying to find the main sewer line so I can add a clean out trap

Sewer gas - did I hook up to main sewer line correctly? [ 3 Answers ]

Moved a mobile home in and ran the sewer line to the main line - on some days I smell sewer gas, and I think it's coming from the vents on the house! - I want to know if I should o had put a "P" trap or something in line before hooking up to main sewer line? I have seen other places saying to...

Is it possible / OK to expand sewer line @ clean-out port? [ 2 Answers ]

I am looking to expand my home, basically enclosing the attuc space. I would like to include a bathroom into this plan but am unsure how to get a sewer drain line up to that point. I would like to avoid breaking into my slab if possible to acces the sewer lines. I have 2 clean-out ports on the...

Sewer line depth? Clean out spacing? [ 8 Answers ]

I'm building a house in Austin and was wondering if someone can tell me the depth a sewer line has to be buried per code... I believe it's 18" but wanted to check. And how far do the clean-outs need to be spaced for a long run from the house to the sewer tap? 100 ft?


View more questions Search